Your Order / Return May Be Delayed Due To Shipping Irregularities.   Read More
We have detected you're not on the correct site for the car you have selected! Click the green button below to go to the correct site.
Select your car: 
BMW Mini Cooper
Select
How To Articles
How to fit a 1275cc cylinder head to a 998cc Classic Mini Cooper
Created: July 24, 2003
There is no specific large-bore (1275cc-based) head casting number that will fit the 998 engine any easier than any other. They all have the same problems - generally requiring exhaust valve relief cut-outs machined into the block and re-alignment of the front water gallery transfer ports. However, I would avoid using heads with valves bigger than 35.7mm on the intake since these are too big for most 998 engines unless they are absolutely full-race spec where top end power at high rpm is all that is required.
Classic Mini Cylinder Head - Torque-down and head gasket problems
Created: July 11, 2001
First a brief word on head gaskets. If it is not a genuine Rover or Payen gasket, don’t use it.